alt Hacker NewsFrankly, the only advantage I see from a spec list for the Core One is a chamber exhaust (not heater, just exhaust).
Compared to a P1P it’s missing a camera.
Compared to the X1C it’s missing a camera, the LiDAR, and carbon rods.
Also, the AMS solution on Bambu printers is much better than the MMU by Prusa.
Replies
> Compared to a P1P it’s missing a camera.
Built in yes, and that's disappointing to see. Unsure why they aren't just including that at this point. Assuming its like the XL, you can use any camera you can find (phone, rpi, esp) and link it to the printer to get a "first party"
> Compared to the X1C it’s missing a camera, the LiDAR, and carbon rods.
I never use the LiDAR on my X1C. In my opinion is produces worse results then calibrating manually. Agree on the camera.
Regarding carbon rods, I would be surprised if it made any tangible difference to 99.99% of people.
> Also, the AMS solution on Bambu printers is much better than the MMU by Prusa.
Agreed. I never use AMS or MMU. For some its a dealbreaker to not have something as good as AMS. I never print multi material, other than using multiple heads on the XL.
> Compared to a P1P it’s missing a camera.
The video showed a camera with an "optional" legend.