alt Hacker NewsThat "deltic" engine just for the water pumping is incredible, I'd never seen that cylinder layout before.
Replies
The type 55 "deltic" locomotives, named after army regiments used to do the east coast Edinburgh-London train run, there were 22 of them in service and one in the science museum London. They had the first 100mph rating for diesel passenger service.
The engine had a unique characteristic whine or whistle. As an avid train spotter at Waverley station in edinburgh I loved hearing it, saw every one and was in the cab of two thanks to long suffering kind engine drivers.
There was a mini deltic too. I'm not sure it went beyond a testbed loco.
Piston engines got pretty wild before turbines eventually took over the world. The most efficient ones were more efficient than today's turbines in terms of BSFC[0]. One of the most interesting to me was the Napier Nomad[1], which used turbo- and super-charging. However, the turbo had secondary fuel injection and effectively ran as a turbine to drive the compressor.
[0]https://en.wikipedia.org/wiki/Brake-specific_fuel_consumptio... [1]https://en.wikipedia.org/wiki/Napier_Nomad
They're unique. Originally designed to power fast torpedo boats during WW2, three of these powerful and compact engines would churn out plenty of power for the boat up to 50 kt.
There are numerous "atypical" piston engine layouts, though I cannot recall precisely where I'd seen a reference, probably on YouTube ~10 years ago.
The basics are a single piston, dual (often opposed at an angle or flat-head design as on older BMW motorcycles), in-line (usually 4-cylinder), or V (as in V-6, V-8, V-12, etc.)
Then there are radial engines used in piston-driven aircraft. These virtually always have an odd cylinder count, to prevent locking (there's always an unbalanced force in the direction of intended rotation, or so one hopes).
<https://en.wikipedia.org/wiki/Radial_engine>
There are various rotary engines, with the Wankel design best known. Very high power-to-weight ratios as a result of having three combustion chambers per rotor, but a relative short lifecycle due to wear, and some compromises in efficiency. "Flying car" company Moller International, out of Davis, CA (and apparently inactive since 2015) had at its core a Wankel-based powerplant, with four pairs of counter-rotating engines powering four ducted fans. It sounds like all the angry hornets in operation.
<https://en.wikipedia.org/wiki/Moller_M400_Skycar>
Wikipedia lists some other unusual designs as well: <https://en.wikipedia.org/wiki/Reciprocating_engine#Miscellan...>.
I believe that the axial engine may have been featured in that video mentioned in 'graph 1:
> The Napier Deltic engine is a British opposed-piston valveless, supercharged uniflow scavenged, two-stroke diesel engine
Any tech that includes the word “scavenged” must be cool and efficient
Two of the three crankshafts rotate in the same direction, whereas the third one moves the other way around!
It amazes me what we manage to figure out on the mechanical side of things. Just look at motorcycle engines. Screaming along at upwards of 20k RPM and just taking it in stride and moving people down the road at what might as well be supersonic speed.
Napier was on the cutting edge of certain kinds of IC engines for a long time.
https://en.wikipedia.org/wiki/Napier_Sabre (1938).
Powered the absolute monster that was the Tempest (up to the Mk 2 - they did have reliability issues they never quite solved but 3000+HP out of an engine that weighs barely more than a tonne dry will do that)
https://en.wikipedia.org/wiki/Hawker_Tempest
Was happy to see the name re-used for our upcoming fighter.
We also called the Eurofighter the Typhoon and the (WW2) Typhoon (also a Sabre engine) was the predecessor of the Tempest - it started as a re-wing of the Typhoon but enough changes where made to give it a new name.
Just a devastating superprop in its day.