Nice article! One point of clarification:

> When the kernel starts it does not have all of the parts loaded that are needed to access the disks in the computer, so it needs a filesystem loaded into the memory called initramfs (Initial RAM filesystem).

The kernel might not have all the parts needed to mount the filesystem, especially on a modern Linux distro that supports a wide variety of hardware.

Initramfs exists so that parts of the boot logic can be handled in userspace. Part of this includes deciding which device drivers to load as kernel modules, using something like udev.

Another part is deciding which root filesystem to mount. The root FS might be on an LVM volume that needs to be configured with device-mapper, or unlocked with decrypt. Or it might be mounted over a network, which in turn requires IP configuration and authentication. You don't want the kernel to have those mechanisms hard-coded, so initramfs allows handling them in userspace.

But strictly speaking, you don't need any of that for a minimal system. You can boot without initramfs at all, as long as no special userspace setup is required. i.e., the root FS is a plain old disk partition specified on the kernel command line, and the correct drivers (e.g. for a SCSI/SATA hard drive) are already linked into the kernel.