>It works like this: after loading the clothes, detergent and water, and letting it sit for 10-15 minutes, users can close the lid and turn the handle for two minutes, repeating this twice more after ten minutes of letting the clothes sit in between spins. And voila — the machine can then be drained using the tap at the front.

I lived off-grid and did all of our laundry, a family of four (including a baby in cloth diapers), by hand, even in the winter (below -20F).

You know what works as well? A wash tub and a stick. Or a bucket and plunger. Or a posser if you're really fancy. I used a 30 gallon garbage can and a hand-carved posser. In mild or hot climates you can just stomp on it.

Same principle: Draw water, add cleanser, agitate for a couple of minutes, let it soak, return at some time in the future, agitate again. Remove laundry and let drip dry while you draw fresh water (mangles and spinners speed this up and are more effective, but not necessary). Squeeze wet laundry at lowest point where water has gathered. Repeat entire process with clean water, then lay it out in the sun prioritizing any sides with stains.

The secret sauce of clean laundry isn't how you agitate the laundry. It's just time and chemistry.

Water access, cleansing agents, and patience are fundamentally more important than providing "revolutionary" contraptions. It's the same difference between teaching people about no-knead bread and giving them hand-cranked stand-mixers. One solves the need for intensive manual labor and the other doesn't, but introduces a new point of failure.

And even importing enzyme-containing detergent is unnecessary. Plant ash (a source of alkali) and aged urine (a source of ammonia) are all you need to create what's known as bucking lye which cleans just as effectively and uses byproducts that they themselves produce by default. Residual stains are removed via UV from sun drying.

There's absolutely no need to complicate this.