logoalt Hacker News

Unifi Travel Router

284 pointsby flurdytoday at 12:30 AM244 commentsview on HN

Comments

wateralientoday at 1:06 AM

I never travel without my GL-AXT1800. Saved me so many times: https://www.gl-inet.com/products/gl-axt1800/ I’m actually on it right now.

show 15 replies
matt-ptoday at 11:31 AM

I never really understand why you'd rather have one of these over just enabling "hotspot" on your phone. Ethernet is the only reason I can think of

show 3 replies
bnc319today at 2:31 AM

So… hear me out. Could I connect this to an airline’s paid in-flight WiFi network, and then broadcast an open network to effectively open up access to all other passengers for free? If enough WiFi pirates do this on flights perhaps it would kill paid WiFi entirely (just need enough Good Samaritans)

(And yes I know there are other bypasses you can do like spoofing MAC addresses to get around some device count restrictions)

show 9 replies
FrameworkFredtoday at 4:13 AM

To all the commenters who asked if it's worth it? IMO it's super worth it if you have more than one wifi access point and it gets more and more worth it as your network gets more complicated.

I upgraded to homogenous ubiquiti/unifi when I set up a point to multi-point on my farm because I thought it would make that part easier. Surprisingly, those links aren't really baked in to the rest of it, but the router and wifi antennas that I've installed around those links "just work" with a private, protected, and guest network.

I used to have to update two different routers with the same SSID, username and password to make "hopping" from one to the next "seamless" and, now that I've got 8 wifi antennas in a mesh with a single UI to configure them all, I can't even imagine how I'd do it with the hodge-podge of gear I used to work with.

And I'm probably going to buy a travel router, but I'm wondering, if I use it connect to the hotel wifi, will I be able to use the thing as a wifi hotspot as well or do I have to use an ethernet point because the wifi is "taken"?

show 1 reply
Brajeshwartoday at 10:29 AM

This is brilliant, especially if you are already invested in the Ubiquiti/UniFi Ecosystem. There was a UniFi Teleport, and I think that function is now part of this Travel Router. From the video and the images, I believe this can also be added to a car act as a family wi-fi on the move.

I’ve always had a Pocket Travel Router (along with a thin but long enough RJ45 cable) with me while traveling, starting with the D-Link AC750 Travel Router. It does away with Wi-Fi Change, and all of your devices just continue to work, no worry about syncing, file-transfers, etc. A travel router becomes even more convenient when traveling with the family.

cromkatoday at 1:07 AM

This is brilliant, actually very innovative product by Unifi. It's interesting because it seems they do what Apple does: they can add new products and features only because all the devices work together in an ecosystem.

show 2 replies
makestufftoday at 1:14 AM

It seems like the main feature is being able to access your home network to watch netflix, access LAN devices, etc.

How is this different compared to running a tailscale exit node in your home network?

Is the benefit of this that you have a hardware device that you can connect to instead of needing software like tailscale?

show 4 replies
saagarjhatoday at 1:36 AM

Available December 29th: https://store.ui.com/us/en/products/utr

show 2 replies
easyKLtoday at 8:59 AM

Please also consider the GL-iNEt Puli (XE300): - 5V 2A USB C connector and a 5000mAh battery - SIM and [not tested by myself] eSIM support. - Tailscale and Nebula available as a plug-in. - Main network and guest network can be set. - OpenWRT if you want the GL-iNET firmware.

show 2 replies
syntaxingtoday at 1:27 AM

I really like “bring your home everywhere aspect”. I can be a pain connecting my whole family devices to another SSID. If it can do WiFi repeating (as in login to a single hotel account and stream to rest of device), I would absolutely get one. If not, GL inet is still the way to go

show 3 replies
shmoogytoday at 2:43 AM

Wonder how this will work to connect into hotel networks - on my glinet I have to clone my iPhone MAC address so I basically have to connect to the WiFi, do the with authentication enter room number and last name, then disconnect and boot up the router.

Is there a better way to get these connected to a WiFi for relaying where the Ethernet isn't an option?

show 3 replies
DetectDefecttoday at 3:45 AM

Have Ubiquiti/Unifi firmware/devices ever been subject to independent, third-party security testing? Surely a company charging such a premium for high-end devices has invested in such processes and is proud to showcase them ...

show 2 replies
cyberrocktoday at 1:51 AM

I wish one of these devices would have an internal battery again like the old HooToo Tripmates. Using it with a power bank doesn't feel quite the same.

show 1 reply
JSR_FDEDtoday at 3:29 AM

Related, the GLiNet Comet (remote KVM) are also excellent. Have bought one for every elderly family member so I can support them more easily.

show 3 replies
frugalmailtoday at 10:55 AM

It reads "Tethered 5G", why would a high-end travel router not support sim/e-sims directly?!

show 1 reply
firecalltoday at 2:46 AM

>while captive portal logins on hotel networks are handled quietly in the background.

Anyone know how it automagically sorts out connecting to the hotel WiFi?

Hotels often want some combination of my room number and surname I've found, or some combination of hotel name and floor password.

show 2 replies
qgintoday at 2:12 AM

> Automatic handling of captive portal authentication

Very curious about how they're pulling this off

show 1 reply
apexalphatoday at 7:21 AM

Does this also bridge L2 stuff so I am actually on my LAN?

Otherwise I don't really see the point to carry a specific hotspot device when my phone has one built in.

dawnerdtoday at 5:10 AM

Really wish their press Release / marketing want obviously llm generated.

Im their target audience for sure but I’m not sure I need all of the same features my home network has. Really my travel router is just used to share a paid connection and run AdGuard network wide.

GlenTheMachinetoday at 2:07 AM

I travel internationally all the time. Someone tell me why I need this.

show 4 replies
jbverschoortoday at 4:45 AM

Oh I thought one with 5g cellular connectivity

donkeylazy456today at 4:53 AM

it says travel but not supporting LTE/5G

show 2 replies
tonymettoday at 1:58 AM

I clone my home WiFi SSID with my travel router so when we arrive at the hotel all of our devices auto connect without having to configure the consent / captive WiFi screen.

It’s also nice to control VPN and DNS from one place , in case the hotel is doing DNS or IP filtering.

And quite a few hotels still offer wired Ethernet , which helps performance.

show 1 reply
system2today at 6:15 AM

The page doesn't even have a buy button. Why?

show 2 replies
fnord77today at 5:24 AM

I don't understand this post. Is it an ad?

I have wireguard running on my home router. Why do I need a piece of hardware when my laptop already can connect to it from anywhere?

show 2 replies
baggy_troughtoday at 2:36 AM

I need something like this to share a single wifi connection among devices on a cruise. I don't care about the home network access though. Any recommendations?

darkreadertoday at 5:07 AM

[dead]

allovertheworldtoday at 1:39 AM

whats the point of this? I got wireguard on my phone connected to my home network (also unifi).

If this device had a 5g sim slot, then I could see the point but it’s not that.

show 1 reply