alt Hacker NewsWhat’s the deal with 5v, 3.3v and 24v “standards” for sensors? It seems like there are really three different markets and it sucks because crossing “lanes” is really annoying. I like how you all made the qwik connectors “just work”, but now that I’m trying more industrial stuff I’m having a hard time figuring out how to get my 24v world to play nicely with the 3.3v world but of course my 24v world only wants to do SPI over 5v.
Anyhoo, sorry we can’t just stick to the technical drama.
Replies
great question! so historically microcontrollers (and sensors) were 5V 'CMOS' power and logic. this was way better than the up-to-12V for TTL logic but over time the desire for higher clock speeds / faster IO / lower power means the voltage needs to drop (since power = current * voltage lower voltage is lower power) the next voltage standard became 3.3V. these days, even 3.3V is a 'bit high' and we're seeing lots of device that are 1.8V or 1.65V or even 1.2V max (yeek!) one thing we do for all of our sensor breakouts is add level shifting up/down as necessary so they work with EITHER 5V older boards (yay no need to throw them out!) or with the newer 3.3V boards (woo forward compatibility) level shifting and regulation also reduces the risk of damage from over/under volting or plugging stuff in backwards. this is documented here: https://learn.adafruit.com/introducing-adafruit-stemma-qt/st...
maybe someone from sparkfun could post advice for you here too...
> What’s the deal with 5v, 3.3v and 24v “standards” for sensors?
Historical garbage and different manufacturing technologies. Be happy if you can get away with only 5V and 3V3 rails in your project. 24V is usually to interface with industrial sensors. And sometimes you see 12V as well, for stuff that's RS232 based.
And on top of that you got a fifth standard, 4..20 mA current loops. That one is used for long range transmission of analog values of a single sensor per wire pair, with 4-20 mA being seen as the value (4 mA = 0%, 20 mA = 100%), and anything less being seen as a cable break, anything higher as a short circuit somewhere.
Those levels are based on the electronics themselves. Earlier circuits used TTL which needed higher voltages to signify a "High". Newer CMOS based electronics need less voltage.
Lower voltages help with power savings. Higher voltages can and do work better in high power, high noise environments though! 24V as you see is still very popular and useful inany applications.