alt Hacker NewsThis really takes me back. My first actual 'use' for Linux was making routers out of leftover computers.
The perfect machine back then was a 100MHz Pentium, in a slimline desktop case. At the time, the Pentium III was the current desktop chip, so you'd have a pile of early Pentium-class machines to use. And even a 10mb ISA network card (3Com if possible) would have plenty of power for the internet connections of the day. But 100mb PCI cards were still fairly cheap.
Install two NICs, load your favorite Linux distro, and then follow the IP-Masquerading HOWTO and you've got internet access for the whole apartment building, office, or LAN party.
Eventually I moved on to Linux Firewalls by Robert Ziegler for a base to build on.
After that I started piling other services on, like a spam filter, Squid cache, it was amazing to get so much use out of hardware that was going to just get thrown out.
Replies
I briefly put a Pentium MMX 200MHz system in service a few years back to bridge my parents to their neighbor's WiFi (with consent of course) when their DSL line was down for a few days. I installed a PCI Ethernet and WiFi card, booted into OpenBSD, and amazingly it was fast enough to get them through the downtime. :)
Someone need to write a new book on Linux router.
The old one is getting really old now, nearly 25 years ago [2].
[1] Book Review: Linux Routers - A Primer for Network Administrators, 2nd Ed:
Hell, you could do this with a single NIC if you have a VLAN-aware switch.
Inverted case here, my first real use cases for Linux was flashing routers with openwrt and doing fun stuff!
Ha, that's very close to my story as well. I had a 166Mhz Pentium and it was all PCI cards and 100mbit by then. That was essentially the start of my career.
> The perfect machine back then was a 100MHz Pentium, in a slimline desktop case. At the time, the Pentium III was the current desktop chip, so you'd have a pile of early Pentium-class machines to use. And even a 10mb ISA network card (3Com if possible) would have plenty of power for the internet connections of the day.
I was doing the same. Router and firewall on old Pentium CPUs. I don't have these machines anymore but I still have HDDs from back then with post-it notes on them saying stuff like: "Linux firewall / HDD 120 GB". For whatever reason my HDDs adapter that can read just about everything doesn't have the correct pin out for those HDDs. Would be a blast if they were to still boot: at some point I'll just buy a compatible adapter and see what I can find on those HDDs. I was very likely also saving some backups there.
But really my best memory was years (I think) before 120 GB HDDs became an affordable thing, in the super early Slackware days, on a dial-up connection: I had a 486 desktop computer and I'd share the Internet connection to a very old laptop (!) using... PLIP. A printer cable and the Parallel Line Internet Protocol. Amazing hack: my brother and I could then both use Netscape at the same time and to us this felt like a glimpse into the future.
That takes me back, I had the same trajectory , getting a newspaper’s news room and offices online with a single computer sharing its ISDN connection. Think ours was also a 100mhz gateway 2000 computer or some such.
That snowballed into “we want a website do you know how to do that?” and. Well, no, but it had Apache available and I … figured things out enough to take the skills elsewhere.
Repeated the same trick with a place in Wisconsin, who initially shared a 56k dialup connection with all their dispatchers and were impressed the thing had stayed up for 900 days without even redialing. 90% of their work was done in an on-prem wyse terminal anyway, dialup used to do the job for email or googling an address.
27, 28 years later I’m still dragged in front of them once in a while to ask how they can accomplish something cheaply with Linux, bubble gum, paper clips, or whatever . The times and technology have changed, but not how cheap they are!