alt Hacker News> However on android the sampling rate of the acceleration sensor is limited to 50/s. At least if you install through the official app store.
My understanding is that it’s the same even on iOS (or at least on my iPhone SE 2020). More specifically, the output only measures till 50hz (but the sensor sampling rate is actually 100hz - Nquist, you need double the measured frequency as sampling frequency, yada yada.)
Replies
user_7832 • today at 12:43 PM
By the way, it’s important to note that measuring vibrating things can permanently damage the OIS VCs in the camera. (See: Apple’s warning against motorcycle mounts.) my iPhone already had a broken OIS so I didn’t mind as much.
I get 100/s on an iPhone SE2. 50/s on a Samsung Galaxy A16 which was released in 2024 or 2025, but that is due to an API restriction. You can export from phyphox (.xslx or .cvs). You get timestamps in the first column. Phyphox refers to the raw data rate, not Nyquist freq.
The sensors have analog lowpass filters that can be adjusted in order to avoid aliasing.
In general, with more bandwidth you can do more intrusive things. But if you want to tell wether two people ride in the same car, 50 Hz should be sufficient anyways.
Phyphox has a smartphone sensor database:
https://phyphox.org/sensordb/