alt Hacker NewsFor those interested not only in simplified energy balance of a fusion power plant as shown in Fusion Power Plant Simulator, but in more realistic engineering of heat extraction from a tokamak I recommend the following lecture by Dr. Dennis Whyte from MIT Plasma Science & Fusion Center.
Fusion Reactor First Wall Cooling
https://www.youtube.com/watch?v=bHJyoqDO0zw
One of the designs uses 3D printed silicon carbide vacuum vessel cooled by a layer of molten lead and a layer of FLiBe (a molten salt made from a mixture of lithium fluoride (LiF) and beryllium fluoride (BeF2)).
https://en.wikipedia.org/wiki/FLiBe
The lithium component of FLiBe is used for breeding of the radioactive isotope tritium, which will be extracted from the salt and used for making the deuterium-tritium fuel of the tokamak.
Replies
>realistic engineering of heat extraction from a tokamak
This is why I love the idea of Helion so much.
Who knows if it will ever work, but skipping the thermal transport and doing direct current generation from EMF in the reactor seems like it has tremendous potential for simplifying (and eventually downsizing)
It would be quite outstanding if MIT Plasma Science & Fusion Center released their core courses on OpenCourseWare. Considering the potential impact of this technology and how much it's needed, humanity doesn't seem to be trying that hard to make it work.
> cooled by a layer of molten lead
Really gives a perspective on the range of temperatures handled.
My favorite video that walks through fusion energy design/sizing/cost equations is also a lecture by Dennis Whyte: https://youtu.be/KkpqA8yG9T4?si=U8xaAAvjdnt6yqr8 It’s a really engaging lecture - I’m normally pretty put off by 100-minute lectures on YouTube but this one was both very easy to follow and perfectly scoped. Can highly recommend it - the learnings from it are timeless fundamentals that really make fusion power design and economics accessible.
The big takeaway is that better magnets reduce reactor size by the 4th power, and energy output and cost by the cubed power. Finding a material for the magnets which doubles their strength would reduce the size of the reactor by 94% and the cost by 88%.
A possible conclusion one could make is that with regular advancements in magnets it’s very possible that the first operational commercial fusion reactors will be relatively low-cost compared to current and planned fusion reactors, and even though they may begin construction after the next generation of super-sized fusion reactors - they might be finished and operational before their “predecessors” with inferior magnets have completed being built.