alt Hacker NewsI love my Framework laptop. The only thing I haven't seen mentioned in detail is the expansion card bay redesign. Current F13 expansion cards will pull out sometimes when you remove a USB cable, which is a real annoyance. F11 fixed this by creating optional set screws you can install on the inside of the machine that forces the expansion cards to stay engaged.
I know F13pro has redesigned the switches for removing expansion cards, and that the design was headed by the same person who did the F11, so I'm really hoping for set screws or some sort of similar "true" locking mechanism.
If anyone from Framework is reading this, would you be able to fill in some details?
Replies
If it's what I'm thinking about, they showed it in one of their videos where they compare the old 13 to the Pro. It looked like a latch mechanism that you can operate with one hand but still keeps it secure in place.
Edit: this should be what you want to know - https://youtu.be/GnOpIQJnYWU?t=536
> Current F13 expansion cards will pull out sometimes
Just echoing what others have said here: I'm typing this on an original F13 I think from batch 6 which has had many upgrades but not the bottom cover. I have never had an expansion card pop out accidentally. I can't imagine that happening considering how difficult they are to remove. I usually have to lay the laptop flat upside down and use my multitool while holding the button to push a card out.
My wife has an F12 and she has also never had one pop out accidentally. Unlike mine, hers has locking switches to keep them in place, but even with the switches open they're pretty hard to remove.
Is it possible there was an intermediate redesign at some point that made them too easy to remove before they landed on the latest design?
> Current F13 expansion cards will pull out sometimes when you remove a USB cable
That feels like a defect in your particular machine, not a design flaw. With my laptop, the cards are actually incredibly difficult to remove most of the time. I can't imagine one of them coming loose by accident.
I have an early 13 and find the expansion cards take a lot of effort to remove, so maybe it’s a batch thing. Seems like the new 13 redesigned it a bit anyway. I’ll probably get the new bottom so I can use the new battery.
I've had the framework 13 since batch 5 of their original first model and that has never happened to me once. Are you sure you're pushing the expansion cards _all the way_ in? They should click and the little button between the cards should pop up slightly more when the cards are fully inserted. It is certainly possible to have the cards visually look inserted and work normally but haven't actually been pushed in far enough to click/lock into place.
FWIW I've also replaced my chassis once, and never had this issue with either chassis.