> paid a professional pc builder

They did not. That's a mining rig not a workstation. It's visible from the photo and the chart showing multiple failures over a short period of time including the risers -- which are visibly very low quality -- failing twice.

You have 50K, you call a real expert like Puget Systems or Digital Storm.

I wonder why using 2 PSUs resulted in having slower interconnect.

There is no specs in this blogpost regarding cpu/motherboard choice, but if you go with threadripper pro they have 128 pci-e lanes for some time now, so using all GPUs at full speed shouldn't be a problem

If you split models using pipeline/layer parallelism you don't have to care about a slow interconnect, you're just slowed down a lot when running a single inference at a time as opposed to a fully pipelined minibatch. But tensor parallelism requires much faster interconnects than you could get in your average server, so I'm not sure that a different motherboard would help all that much.

what is a "professional pc builder" in 2026

Consumer motherboards can still make sense even if you leave some performance on the table. Running an actual 8x GPU server is not something you'd want to do in an apartment. Imagine the old Lucasfilm "THX" trailer where an unearthly-sounding foghorn whine rises to a sweeping crescendo at reference level, only without the decay at the end.

At the time he put this rig together, there weren't a lot of open-weight LLMs that could run well on 6x48=288 GB, so it probably wasn't a huge loss. There still aren't, really.

Right now I'm in the process of cramming Blackwell cards into an old DDR4-based Milan server, where the important thing is to be able to run large models at all. The GPU fans alone burn over 400 watts at full throttle.

Don't those Ada 6000 GPUs support NVLink? I think I can even see the cover for the connectors in OP's pic.

edit: Hm, finding mixed information online on whether that's still supported or not. Apparently it was removed in workstation GPUs.

[dead]