alt Hacker NewsI jumped to the end and saw $2.3k for the mini split and couldn't believe it. I've installed mini splits on two homes and the quotes were always in the $15-25k range for 3-5 head units, so $2.3k for a head + outdoor condenser unit sounded implausible, but then I saw he found a surprisingly good deal:
> I got a ton of quotes for installing a mini split. They ranged from $4-$7k, which was higher than I expected after researching the cost of a quality small unit and knowing this would be a tiny job for an HVAC contractor, especially because I had my electrician prewire the electrical. I was considering installing a DIY system (Mr. Cool DIY system with pre-charged AC lines), But found an HVAC contractor who would install a system for a much lower price than the other quotes I received (and he had great reviews on Thumbtack). In the end, I got a Daikin Mini-split, a common system with many replacement parts. The installation took about 5 hours, and my tech did a great job. I am glad I researched and got a lot of quotes for this one.
Replies
one thing about discount DIY mini splits: they're sometimes/often the same model, with a hodge podge of similar but not identical components. it can be very difficult to get a repair person to work on these - they stand a lot to lose if they try to operate on it and make it worse. they really prefer consistency, and - they also seem to harbor a bit of a distaste for diy systems. Actually, I was educated by one serviceperson's opinion and by the end of their complaints, the experience cost more than the cash, injury wise. But I think relaying this, has some value, because I suspect it's common.
Honestly, I would recommend just doing it yourself. Especially if you have a contractor pull in the electrical connection for it. I installed a pre-charged unit in a much more complicated attic setup (condenser mounted to outside wall on second floor, 20' of refrigerant lines run with lots of angles) and the whole thing took 6-8 hours with no experience. Mounting it to a shed where you're basically just cutting a hole in a wall and the indoor unit and outdoor unit are in more or less the same location should be extremely straight forward. The unit cost me less than $1k five years ago and has been running perfectly ever since.
I bought my first minisplit ~4 years ago since none of the contractors were available in the hot summer. I bought the tools as well (vacuum pump, manifold, pipe cutters, etc.).
It cost me ~650$ total.
The next time I bought a minisplit (3.5kW one), I already had the tools and it cost me only 450$. A proper one meant for use during harsh winter would probably costs a bit more though, at around 1000$.
So I have set up a few of them for my family and friends so far. The units come pre-charged with gas for ~5M of ducts, there is nothing hard to set them up.
I also set up ESP32 controllers so I could attach them to Home Assistant, bypassing any Chinese cloud apps, etc.