alt Hacker NewsTake this with all the salt that random third-party guesses about a still-in-investigation event should be taken with -- think fully salt-cured ham -- but it looks like the landing was with a quartering tail wind, and the upwind (left) gear never really got weight on it; the wheel bogie needs to be straightened by weight against both the front and back wheels to register weight-on-wheel, and the auto-brake systems need positive weight-on-wheels from at least one redundant sensor on each of the three gear to engage. Came down hot, and basically skimmed with one wheel partially off the ground for some, most, or all of the way down the runway, preventing the braking systems from kicking in.
Replies
> Came down hot
Really that's all that needs to be said at the moment. They had way too much energy[1], which anyone with flight sim or RC experience will recognize as a routine mistake when hand-flying.
The question is why all (all!) the layers of checklists and warnings and process and ATC direction somehow failed in combination to prevent. Yeah, they should have aborted for sure, but they didn't, and we won't know why for a good while yet.
[1] Which can just as easily mean "too high" as "too fast", c.f. the sink rate warnings in the logs which would be consistent with trying to squeeze the airplane down onto the runway. But again we won't know without more data.
AIUI, they should never have gotten that far. They should have gone around at 1000 feet.