Here are the parts I bought, I'm still getting it all setup (I have my pictures displaying, working on designing the 3D printed case now, and testing it all) but according to OpenDisplay's calculator [0] I can expect 3.4 years if I refresh the screen once every 4 hours (and currently I'm doing closer to once a day to mimic my ESP32s which need deep sleep and once-a-day refresh to get even month/months of battery on a charge).

Screen: 7.5" Monochrome eInk / ePaper Display with 800x480 Pixels (https://www.seeedstudio.com/7-5-Monochrome-ePaper-Display-wi...)

BTLE board: XIAO ePaper Display Board(nRF52840) - EN05 (https://www.seeedstudio.com/XIAO-ePaper-Display-Board-nRF528...)

Battery: 3.7V 2000mAh - (https://www.amazon.com/dp/B0FR9GH966)

Picture of it all assembled (no case yet): https://cs.joshstrange.com/zJFvGGPB

The image rendered to the screen is coming from a little service I wrote that renders a book quote it pulls from BookOrbit which syncs with KOReader (annotations, progress, etc). My plan is to set up one of these one each bookshelf/series rotating quotes I highlighted from the series.

Here are 2 ESP32-based screens I have, the one on the left is a an all-in-one [1] and the one on the right I printed the case from the TRMNL DIY kit from SeeedStudio [2]: https://cs.joshstrange.com/knk4Ns2h

Right now only the BTLE one is running OpenDisplay (the other two are semi-managed by HomeAssistant ESPHome) and all the devices are in HA for controlling them, though the ESP32's all deep-sleep for saving battery so I can can't "push" stuff to them like I can the BTLE one.

[0] https://opendisplay.org/index.html#battery

[1] https://www.seeedstudio.com/reTerminal-E1001-p-6534.html

[2] https://www.seeedstudio.com/TRMNL-7-5-Inch-OG-DIY-Kit-p-6481...