logoalt Hacker News

How to make almost anything

335 points • by o4c • today at 5:50 AM • 59 comments • view on HN

Comments

renehsz • today at 7:12 AM

It seems some people aren't happy about the fact that this course only glosses over each topic, teaching students only superficial knowledge instead of doing a deeper dive on one or a few.

But let's not forget that an overview of what’s even possible is extremely valuable in its own right. When these students are later faced with a problem X, they'll remember that there was this thing called Y which might help. They won't know the details, but at least they'll know where to start looking.

This is especially important if you want to rise to managerial positions, and it might become more relevant now that AI agents are increasingly capable of implementing things: Solving problems is not all about how to do something, but also about knowing what can be done at all. Laypeople often have no idea what's possible, but engineers do, which lets them be creative with their tools.

All of this is not to downplay the value of true in-depth knowledge of a specific subject. But those subject matter experts typically gain their expertise on the job, or at a later stage in their academic life when they conduct proper research. An overview course like this one doesn't hurt even if many students will choose to specialize later on.

➕ show 8 replies
zakqwy • today at 8:37 AM

I took and later TA'd this course. The weekly pages that guide lectures are only part of the story; the best way to see what is actually taught is to peruse the sites students make to document their projects. Past experience varies, but in most cases folks come in with minimal knowledge of e.g. electronics, CAD, machining, programming, etc., or are perhaps specialists in just one of the disciplines. HTM(A)A is about the delta between the start and end of the semester for each individual, and is both a life-changing course and a massive time commitment for all involved.

➕ show 1 reply
Animats • today at 6:41 AM

That's just one course, not a full load. The pace of that course is insane. It's not clear how much of what they throw at students is intended to be used. The syllabus is huge but the actual projects aren't that complicated. They make students make their own PC board, but that's not all that hard if you have all the right tools. Which they probably do. It's trying to do it in the kitchen sink that's miserable.

I was around for the glory days of TechShop, took about thirteen of their classes, and they covered most of the techniques listed. But making actual stuff took much longer than the classes on machine operation.

I miss having access to CNC mills, laser cutters, and a water jet cutter. The computer-controlled stuff is easy to learn for a programmer. Welding requires endless practice and most people never get very good at it.

➕ show 2 replies
dr_dshiv • today at 7:29 AM

Just back from Shenzhen. Realizing there is a big gap in higher education for how to understand at-scale industrial processes. From prototype to product, there is a lot of know-how. Anyone familiar with instructions along these lines?

➕ show 3 replies
o4c • today at 7:01 AM

Offtopic,there is a free course available on YT on precision machine design by Alex Slocum.

Title: 2.75 FUNdaMENTALs of Design

https://www.youtube.com/watch?v=wgMq7yha9wU&list=PLksE8LDXGX...

probably_wrong • today at 7:20 AM

Here's the link to the comments from when this was posted last year:

https://news.ycombinator.com/item?id=44775830

fooker • today at 10:33 AM

Where can I find good video lectures on this topic?

throwaway019254 • today at 8:54 AM

And then you can continue with:

"How to Make Something that Makes (almost) Anything"

https://fab.cba.mit.edu/classes/865.24/index.html

Nice!

peteforde • today at 8:10 AM

The instructor is Neil Gershenfeld. He is a brilliant dude. https://ng.cba.mit.edu/

I'd love to be able to audit at least parts of this.

dartharva • today at 7:52 AM

The 2023 version has videos: https://fab.cba.mit.edu/classes/863.23/index.html

tunnuz • today at 9:24 AM

Is there an open equivalent of this?

varjag • today at 6:54 AM

(with computers)

epsteingpt • today at 7:49 AM

This is, hands down, one of the best classes in the already exceptional MIT Media Lab.

Gershenfeld is a low key genius, and this curriculum has been taught every year well before AI.

haters gonna hate.

cedijec334 • today at 10:49 AM

Great guy… Friend of Epstein’s. Even made sure Epstein knew he was bringing his daughter to the island. https://epsteinexposed.com/persons/neil-gershenfeld

mitchweaver • today at 6:30 AM

(poorly).

People dedicate entire careers to things like CAD — yet they somehow crammed it all into part of one lecture which seems to be little more than an enumeration of 50 different CAD tools.

The use of lowercase throughout doesn't inspire much confidence either.

➕ show 5 replies
mrnonchalant • today at 7:33 AM

How does one best navigate this? Work their way through the recitations as a start?

DonHopkins • today at 10:08 AM

For balance, Chip Morningstar on How to Deconstruct Almost Anything -- My Postmodern Adventure:

https://webperso.info.ucl.ac.be/~pvr/decon.html

zkmon • today at 7:30 AM

To be fair - they seem to focus on setting goals for learning, so that the student would have to learn it all on their own. It's like vibe coding. Teachers give prompts to students and students deliver on the learning work.

croes • today at 6:32 AM

Make a pencil

Pastookh • today at 8:47 AM

[dead]

NorrisFByrd • today at 7:08 AM

[flagged]

salman10 • today at 8:42 AM

[flagged]

alexisvalentino • today at 8:39 AM

[dead]

bzvox • today at 8:47 AM

[flagged]