logoalt Hacker News

The Secret ThinkPad Powerbutton Code to Bring Dead Laptops Back to Life (2007)

228 points • by sammatilda • today at 11:39 AM • 90 comments • view on HN

Comments

legacynl • today at 1:04 PM

From a former call-center phone operator, I think the 10 1-sec pushes, is just a way to make sure the customer presses the buttons long enough. In our callcenter we often had to ask customer to hold the reset button on their router for 3 seconds. When the router didn't reboot, I would send replacements, until a colleague advised me to tell customers to hold the button for 10 seconds. Apparently when you ask customers to hold the button for 3 seconds, some will actually only hold it for 1 or 2 seconds. Suddenly most customers were able to reset their routers.

➕ show 2 replies
Freestyler_3 • today at 12:27 PM

Its a standard step in troubleshooting "bricked" devices, not specifically the amount of pushes but the unplug any power source and then hit the power on button to discharge power left in the system (caps)

➕ show 3 replies
theandrewbailey • today at 1:57 PM

> Two months ago, I got a new laptop. It’s a Lenovo Thinkpad z61t. I actually ordered a t61, but I accidentally got the z61 instead — and, I actually really like it.

The college I went to supplied every student with a Thinkpad. Everyone in my quarter got the z61p. (This college went year-round, a new class started every 3 months.) No other students before or after had z61p Thinkpads.

Despite the high quality everyone regarded Thinkpads with, this model had some issues that only exposed themselves in a large deployment. (I don't recall any that affected my Thinkpad.) At one point, they had a Lenovo service guy come out and replace the power board in every z61p on campus.

When students graduate, they could buy their Thinkpad for $1. I asked if they accepted change. It's probably the best laptop that I will ever buy with change. It kept working for another 5 years. Now I'm kicking myself that I had not stumbled across this back then before I threw it out.

Today, I work in an ewaste recycling company. I haven't come across any z61p Thinkpads yet. (but I'll remember this 'one neat trick')

➕ show 2 replies
Sesse__ • today at 12:40 PM

My ThinkPad (X280) has a much simpler way of dealing with this: There's a tiny hole in the bottom, and if you stick something sharp into it and hold for a while, the embedded controller will reboot (or was it turn off?).

It basically saved me from buying a new laptop at some point, when it completely refused to charge the battery for whatever weird reason (it would charge for a second or so, and then cut off, then the charger would restart it, new cut, etc.).

➕ show 5 replies
ImPleadThe5th • today at 12:37 PM

I have a dead Lenovo gaming laptop that has been sitting around for the last year. Literally just tried this. And it posted for the first time since it bricked and booted right into my drive once I plugged it back in.

I knew about discharging capacitors and tried holding the power button down and pulsing it before. But I guess this time its magic?

I bet it'll stop working again shortly, but was funny to see.

➕ show 1 reply
gavin_gee • today at 5:22 PM

go look at the forums for ubiquity unifi pro routers. they have the worst behaviour caused by capacitor residual power. they will not restart properly until they are discharged. so if you have a powercut they will not reboot.

you have to unplug for 30 mins, short the power cable pins and then it might reboot

dtgriscom • today at 2:05 PM

Tech support for naive (no offense) customers is an art. A friend's mom was a customer service rep for RCA TVs back in the day (way, way back in the day). Customers would call and complain that their TVs were doing nothing: no lights, nothing.

The standard response would be to ask them to pull the TV's (non-polarized) plug, reverse it, and plug it back in. This was generally successful, NOT because the plug polarity mattered, but because the customer had actually forgotten to plug in their TV.

If the rep had said "is your TV plugged in?", many customers would indignantly say "Of course!" without even checking. The "reverse your plug" request was more successful because it sounded like the customer was doing something intelligent. And, when they went to perform this task, they would discoverer that they'd forgotten to plug their TVs in. The customer could then report that the reversal worked, nobody would mention the unplugged TV, and everyone would be happy.

➕ show 2 replies
matltc • today at 4:13 PM

I have an IdeaPad flex 5 14alc05 that has something like this. Got it from Claude, not sure if documented. It came with a pos nic (mediatek mt7xxx) that basically sucks and would drop wifi randomly and permanently until I did this. It was just hold power for 1 min, I think Claude called it an embedded controller (EC) reset. Temporarily solved the problem, but the only thing that fixed it was to swap in an Intel ax210. Snapped the conn from the old nic into the antenna while removing, bought a replacement but works fine with just the one so far

haritha-j • today at 12:12 PM

Not limited to thinkpads by any means, this is I believe common to most laptops. On my last MSI (no removable battery), the trick was to unplug, hold down the power button for 30 seconds, maybe press the power button a couple of times. I froget what the issue it fixed was, but it wasn't totally dead. but the logic was static discharge.

➕ show 2 replies
consp • today at 4:09 PM

My work laptop has a similar fix for when it keeps memory learning forever. You have to unplug the battery completely and press the power button a few times and the next reboot it works again. Had to do this quite a few times until I learned you can enter the advanced settings in the bios to change the memory timings by adding a variable to the uefi partition. It has official memory modules, still keeps learning forever...

anilakar • today at 1:36 PM

I had a Microsoft Sidewinder 2 joystick that suffered from static buildup. Shelving it for a month always fixed the issue by itself. I wonder if there were hidden tricks like this to unbrick the controller.

➕ show 1 reply
jwrallie • today at 1:09 PM

It works even for non-ThinkPads. My coworker was looking clueless at his open Asus laptop. I said the first thing I’d try is unplugging the battery and holding the power button. He still thinks I’m a wizard.

➕ show 1 reply
Neil44 • today at 3:01 PM

Seems the laptop failed to sleep and overheated in the bag. Maybe it hadn't cooled down enough the first time he popped the battery out. Modern laptops that don't have removable batteries often respond to a 20-30 second hold of power - e.g. Dells do that.

superxpro12 • today at 4:03 PM

my lenovo legion does this... im conivnced there's a bug in their hardware power path that latches itself completely off.

the only way i've ever fixed it is by taking off the back panel and removing the battery to let that mystery circuit completely discharge.

I suspect the power button konami code isnt much more than "discharge the flawed circuit so it can work properly again"

maybewhenthesun • today at 2:47 PM

Interesting.

Had a lenovo thinkpad (another model though) 'die' one me. No way to turn it on. Actually opened it up and did some simple troubleshooting with a voltmeter, checking required voltages according to some guide. No dice. completely dead. 2 months later when I already had a new laptop I was cleaning the cupboard and was going to throw it away. Decided to stick the charger in one more time and see if something worked: good as new. (Had to put all the scavenged parts back in of course, the hdd and the ram mainly).

It has been working fine since (I guess that was about ~10 years ago? )

➕ show 1 reply
mystifyingpoi • today at 2:24 PM

Is there a special combination for phones with glued-in battery? Recently I had an issue with some older Samsung smartphone, where the touchscreen refused to drag lines across the lock pattern. I spent solid 20 minutes trying to unlock it, then thought for another 20 minutes how to reboot it - no hole, power button does nothing, battery at 100% so discharging it would take a day of continuously turning on the screen (or maybe suck the power via USB load).

By accident, I've discovered that yanking out the SIM card shows up the notification that can be used to reboot the phone without unlocking. After reboot, everything worked fine again.

➕ show 1 reply
rickdeckard • today at 3:36 PM

Sounds like all the support-guy wanted to achieve was a full discharge of all capacitors in the device, so he gave a task that ensured that battery and AC are disconnected long enough... :)

mugsie • today at 2:54 PM

Back in the old days of working the PC Clinic in a PC World this basic thing was the go to for all laptops. You wouldn't believe the amount of broken laptops I brought back to live with this.

brody_hamer • today at 1:07 PM

This sounds very similar to “do the prongs on your power cable have holes in them?”

Which, of course, doesn’t matter. It just forces you to actually unplug your device and plug it back in.

This mostly sounds like a way to get the user to wait a solid minute before plugging the battery back in for capacitors to dissipate. There’s no way the number or duration of power button presses matters.

geekamongus • today at 5:35 PM

Let me guess: up, up, down, down, left, right, left, right, B, A, Start?

post_break • today at 2:02 PM

I love how this is so typical for windows laptops. You put them in your bag and they decide now would be a good time to turn into a nuclear meltdown. I have had this happen with a few laptops, thinkpad included, yet macs never seem to turn on when asleep in a bag.

➕ show 1 reply
ogig • today at 1:51 PM

I did this last week on a dead P52. It worked once, then it died again a few days later, sadly. The procedure I follow is slightly different tho, 60 seconds button press instead of the 10+30s combo. Ill try again tomorrow just in case.

ddtaylor • today at 12:47 PM

I'm currently using an Omen that "died" because I opened and cleaned it without properly discharging and slightly buzzed a random chip, which happened to be the embedded controller that operates before the BIOS does. This is basically the reason you can use USB and do some other stuff before your laptop is actually on. The problem is that when I touched that chip I scrambled some bits that stay powered via a separate internal battery that cannot be disconnected.

At the time I did not know the secret power trick for this laptop, which is a similar way of holding the power button while inserting the charger. Instead I tried a few things and gave up because the behavior was inconsistent and frustrating. I stuffed it in a drawer and moved on with other things for a few months.

Randomly probably two months later I opened that drawer and went "oh yeah", then proceeded to kind of just get back into the same mindset of the problem and make sure I remember it correctly, since I'm too lazy to keep notes sometimes. To my rekindled frustration I pressed the power button and it came on normally - minus a BIOS battery CMOS time thing. Sure, I was happy it worked, but I now randomly think about the fucking hours of dedicated and methodical attempts at isolating hardware components that had potentially failed in vain because this piece of shit was now running some scrambled undefined behavior code on a shadow chip.

piltdownman • today at 1:01 PM

Same as it ever was. Who here is old enough to remember the four key boot combo for clearing the PRAM contents stored on the logic board in New World PPC Macintoshes?

➕ show 1 reply
attila-lendvai • today at 1:27 PM

same for my X1 Carbon Gen6, except that you need to unscrew the backplate, and disconnect the battery wiring inside. and of course no need to keep pressing the power button, just hold it down long enough to discharge the capacitors.

happens about once a year; i.e. rare enough to scare me each time...

i used to have an LG screen that had to be unplugged once every year or two. it acted completely dead until unplugged.

throw839389 • today at 2:26 PM

I have fairly premium machine, where bios froze in idle and would not respond to power button. Disconnecting battery and leaving it over night, did the trick. I would be screwed with macbook or surface laptops!

functionmouse • today at 1:00 PM

Many a computer has been saved by unplugging it and holding the power button, and then clicking it over and over again, and flicking the switch back and forth etc before plugging it back in. :)

➕ show 1 reply
Betelbuddy • today at 4:07 PM

They could have used this post last Friday at the FAA...

gambiting • today at 2:00 PM

>>Then I noticed that even though the machine had been asleep, it was really really hot.

Oh you mean the classic windows laptop behaviour of waking up in your bag and cooking itself. Yeah, I've had that on several Dells and even a Razer windows laptop. Now I don't actually dare to put one to sleep, I just have them set to hibernate when the lid is closed - takes a few seconds longer but at least the laptop doesn't randomly turn itself into an air fryer when I'm travelling.

aa-jv • today at 12:35 PM

My washing machine has a 'secret reset' code .. unplug it for 30 seconds, plug it back in, open and close the door 10 times, wait .. reboots.

I kind of wonder, every time, whether this is a uboot thing.

What a world we live in that our washing machines have a magic-sysreq thing going on ..

➕ show 3 replies
sysmon-0x179484 • today at 5:27 PM

[dead]

sysmon-0x179484 • today at 5:24 PM

[dead]

sysmon-0x179484 • today at 5:26 PM

[dead]

pryanshu89 • today at 12:54 PM

At this point, the power button is less of a switch and more of a prayer button.

bertonvv • today at 1:31 PM

This technique is known as a CMOS reset

➕ show 1 reply