logoalt Hacker News

cyberax • today at 10:13 PM • 1 reply • view on HN

> As you "slowly" move the two clocks away from one another, the two clocks will no longer be synchronized due to time dilation, and so you need to account for time dilation, but in order to account for time dilation you need to already know what the one-way speed of light is.

That's why I said "slowly" so that the effect of the time dilation can be kept negligible. If you insist that you MUST account for it, get an additional clock that you move at a different velocity. It'll provide you another data point for the system of equations that you can solve to get the "c" value.

You can measure velocity precisely without any reference to the speed of light by timing how long (according to the clock itself) it takes for it to traverse a given length.

To make it even more watertight, do the experiment in an inertial reference frame with pre-accelerated clocks. Launch two clocks with arbitrary but different velocities along a race track. At the start of the track you have the pulse source along with the reference clock, you synchronize with it as your moving clocks cross the starting line.

Then you measure how long it takes for each moving clock (according to its measurement!) to cross the finish line. This will provide you enough data to solve the equation for the time dilation.


Replies

Maxatar • today at 10:16 PM

I love your enthusiasm and I hope you enjoy the rabbit hole as much as I did when I went down it.

https://en.wikipedia.org/wiki/One-way_speed_of_light