I don't get it. This is what everyone do when they need a giant mockups of things like new model of a cars or boats or giant pharaoh statues, except it's usually done with styrofoam.
Is there some technical novelty to it? The hero image on the company website is an Arc de Triomphe that doesn't seem to be the one in Paris, it is like they are a startup specializing in quickly producing artistic stone decor for projects like the arc?
https://www.youtube.com/watch?v=qJgdijvbJWg
https://www.youtube.com/watch?v=kyHz90gA21s
Reminds me of the link to the Carmelites[0] that was on HN a few weeks ago.
But they do it in stone (they don't seem to mention what kind of stone, tho). I think marmble is a different experience, and I wonder what the implications are. Often enough marble requires an experienced master to "read" it. Since it's a natural stone there will be veins, imperfections etc. Sometimes you'll have to work around it and alter your design slightly while carving - which is not possibble if a robot just does its lusterless job.
While I admire this task, and I hope that we will see more carved stones in our buildings and surroundings again, I also hope that we can use technology as our aid, not as the end in itself.
There is a manufacturer in Germany who does exactly this, btw (rough cuts by robot, fine tune by human masters). So there is a lot of prior art out there - I wonder if there was anything new at all.
I watched this in a museum in Prague on a big screen, it's incredibly and enjoyably artful. That being said I couldn't help notice the final texture felt off. I suspect the techniques are already improving. I watched it Nov 26 but apparently according to yt it's several years old already. I also don't think this one is AI based at all.
What part is being "taught"? It looks like a fairly standard CAM pipeline to me...
It's cool, but it kind of diminishes the value. I could imagine a future where marble sculptures are seen as trashy, because of their ubiquity.
“de-extinction, not displacement”
The only voice left is Claude’s.
It was cheaper to spend a trillion dollars on LLM’s and robotics and then “teach” a robot to carve out this first year bunny assignment rather than pay any artists or stonemasons. Historically their work can last for thousands of years and bring beauty to millions yet unborn who will marvel at the magnificence of this creation. But you know this little stone rabbit is cool too. I’m sure it will make a useful doorstop. Now we can have stoneslop!
I recommended seeking the first clip to 00:30 and play it from there. The perspective is somewhat confusing, but the robotic arm in use (KUKA KR240) is actually huge.
We taught KUKA KR240 robots to carve carve marble sculptures end to end with autonomous toolpathing and simulation, starting with the Stanford bunny as a test case. Here’s how it goes from 3D model to finished sculpture using voxel representations and geodesic path planning.
Marbleslop
> Stone carving never disappeared, but rising costs pushed it out of ordinary construction
Why "rising costs" though? Are the carving tools significantly more expensive? Or did we just find a way to do shittier stuff with less expense and we called carving too expensive?
The profit chain will be how quickly they can replicate a block from a scan of a real block in need of restoration. I have seen countless documentaries on the restoration of old buildings, with the inevitable interviews with stonemasons about how many hours go into each block. The ability to auto-chisel a replica from a scan of an original would radically reduce the cost of restoring old structures.
Two things:
1) A great podcast about why we're bad at statues in the US:
https://slate.com/podcasts/decoder-ring/2026/07/how-taste-po...
2) This isn't a particularly interesting model to sculpt. The parent model is a scan of a ceramic rabbit, and it doesn't have crisp details like really good marble sculptures do.
I have seen Venus Victrix[0] in person, and the detail in the mattress the figure is lying on is absolutely transfixing. You would swear the marble would softly yield if you put your finger on it. There's a detail rendered around the edge of the mattress that likely represents embroidery and it's unbelievably crisp, even as it follows the folds and creases in the mattress.
If we're going to have robots sculpt marble, that is the standard we should be reaching for. If we're reaching for that, I think we're going to find that modeling the finished product in 3d is going to be a significant fraction of the work of actually carving it in stone. I think we're also going to find that the mastery also lies in the tiny decisions the sculptor makes as they work, informed by how light plays off the material in different directions in real time throughout the day.
Can the process in the article achieve results suitable for mounting at the top of a building and viewing from ground level? Probably, and if not now, certainly with time. Can it sculpt something that will command your attention in reverent, slack-jawed awe for hours? I don't see it happening.
[0] https://en.wikipedia.org/wiki/Venus_Victrix_(Canova) Seriously, this and Bernini's David, also at the Galleria Borghese, are worth the trip to Rome to see. If there were nothing else in Rome worth seeing and the food was terrible, they would justify the pilgrimage on their own.