logoalt Hacker News

dietsche • today at 2:05 PM • 1 reply • view on HN

The Chaimberlain / MyQ situation is terrible. I strongly recommend avoiding them all together.

I recently installed a Chaimberlain garage door opener in a location that required three buttons inside the garage. They limit the buttons in software, so that each garage door opener can have only two at any given time!

After some tinkering, I discovered that the Chaimberlain buttons transmit their signal wirelessly these days, even when "wired" to the garage door opener... the wires only provide power. So...

I worked around the problem by placing a dab of solder on one of their security+ 3.0 buttons so that it is always "pressed." Then I wired up the three old school garage door momentary switches to send power to it. When pressed, they power up the Chaimberlain button, which then sends a wireless signal to open the door.


Replies

ToucanLoucan • today at 2:21 PM

Jesus I apparently lucked out when I got mine, late 2018? New enough to work with my newer car's openers but old enough where it was just done with a button and a long wire. I was even able to use the existing laser for the obstacle detection bit.

TBQH I used myQ to link it to HomeKit and literally haven't once opened that app since. Sounds like I should keep that going if at all possible.