logoalt Hacker News

mafm • today at 2:13 AM • 3 replies • view on HN

There has been a recent explosion in open source cad options.

fluidcad appears to be a remarkably good option now - particularly for something that only started development about a year ago.

I have used freecad, solvespace and onshape for at least a hundred hours each to make some reasonably complex parts. fluidcad resolves pretty much everything I found painful about those options.

I have some more limited experience with build123d which is also nice, but just not as easy and interactive as fluidcad.

Fluidcad provides normal interactive 3d cad interface with tools like extrudes/revolves/sketches but explicitly generates code as an intermediate step to constructing geometry and the code can be edited and refactored easily.

The linking between the code and the gui works remarkably well in practice.

It’s far easier to manage parameters and constraints in fluidcad where they are written out explicitly and can be edited vs what happened in a gui-only interface like Onshape.

If you’re playing around with a semi-constrained sketch to understand kinematics onshape tends to “helpfully” add random constraints which is really annoying to identify and correct. In fluidcad everything is way more explicit and visible and clear.

I have only spent about 5 hours using fluidcad but it looks remarkably useful despite some minor rough edges. It’s pretty much exactly what I wanted onshape or build123d to be.

Solvespace is a really beautiful piece of software but quite limited. fluidcad has the same sort of nice vibes as solvespace but is way more powerful.


Replies

NegativeLatency • today at 4:06 AM

Been a free tier fusion 360 user for years and recently switched to solid craft, it’s been amazing. Faster and nicer for what I do (3d printing stuff mostly) no cloud stuff and I can also use it via MCP which I find to be a nicer workflow than openscad

https://solidcraft.io/

Freecad never really worked for me well would get stuck frequently and not be able to figure it out.

WillAdams • today at 2:36 AM

FluidCAD looks very interesting, but when I tried it I got:

>The FluidCAD engine did not start within 30s.

which is an open issue: https://github.com/Fluid-CAD/FluidCAD/issues/80

➕ show 2 replies
SilentM68 • today at 3:14 AM

>> There has been a recent explosion in open source cad options.

Yea, especially more so with ArtCraft cloning the more expensive stuff.

It would not surprise me to see ArtCraft versions of DS CATIA/MatLab/Wolfram that can compete with the originals, in the near future.