logoalt Hacker News

bigiain • today at 5:46 AM • 1 reply • view on HN

Sure, but to be fair, for cars manufactured across the same decade or two, at least going back to maybe the 50s or so (when 12V became "standard") and up to around 2010-ish - there was a small enough range of those things that I would have a reasonably good chance of getting on at the nearest gas station (well, "service station" since I'm in .au).

There were "step changes", like when headlights went from sealed beams to halogen bulbs in reflectors, You either had 6" or 8" sealed beams, or most likely H4 halogen bulbs (or a single filament bulb I've forgotten if you had separate low/high beam lights). If you had a headlight out, it mostly didn't matter what model car you had, or of it was a Ford or a VW or a Leyland, they all used one of 4 types of bulbs and they were all interchangeable.

In my head, and this is more motorcycle specific than car specific, but likely indicative across the entire automotive industry, it was the early 2000s when that started to change. My 1991 and 1998 Hondas and my 1999 Ducati and my 2004 Cagiva all used H4 headlight globes and the same 10/25W tail/brake light globes. My 2009 Yamaha was the first bike I owned where I had to buy headlight globes from Yamaha.


Replies

ssl-3 • today at 6:09 AM

Once upon a time, headlight bulbs used to be more-standard than they are. Or at least: They were from my US perspective.

I've had cars with 9006/9007 headlight bulbs. Those were OK, I guess, other than the polycarbonate housings that turn into a clouded quagmire of shit when exposed to sunlight.

My 2012 Honda uses D2S headlight bulbs. That's a metal-halide part and it does not interchange with any other format, including other metal-halide parts. Each also requires both ballast and igniter assemblies. (Once lit, the bulb itself runs on [IIRC] 35V. But it takes a few kiloVolts to get it to initially arc over, vaporize some metallic salts, and start making light. And none of those volts are the ~12V that the car's electrical system produces.)

But at least it can use ~any regular D2S bulb. More-modern cars often use LED assemblies that aren't interchangeable between models at all.

But, yes: For decades in sealed-beam automobile world, we had a couple of sizes for round, and a couple of sizes for rectangular, and these sizes included the whole light-producing assembly, with focusing elements and the whole shebang. Some included a high-beam filament and some kept that separate, but: Any of these were very normal (standardized) things that anyone could pick up at ~any place selling auto parts and swap out with a screwdriver and whatever it takes to remove some trim.

(I've lived long enough to have seen sealed-beam headlight assemblies on shelves at small-town grocery stores. I have every confidence that if I rolled into the parking lot of such a store with a burnt-out halogen headlight in nineteen-eighty-something, then I'd be able to buy one and borrow enough basic hand tools to replace it in their parking lot in fairly short order. I'd probably also have paid Way Too Much for the headlight assembly itself, but I'd have been very grateful anyway. Convenience has a cost, even in matters of safety.)