alt Hacker NewsI guess the problem is with the price of the sensors. Just look how expensive the Aranet 4 home shown in article is. There are worse devices for less like the IKEA alpstuga. I also don’t know how much electricity they pull.
Replies
I got the ikea sensor, I’d say it’s way more accurate than you need for personal use. I wouldn’t use it as a scientific instrument but it’s well good enough to see if the room is ventilated enough.
I was shocked to see just how fast CO2 climbs while in a room, and how just opening the window just a crack was enough to restore the room to baseline co2.
The thing runs on usb 5v so the power consumption is negligible. It also plugs in to home assistant great.
Ruuvi Air[1] seems to be close to the middle in both price and CO2 measurement accuracy between aranet4 and the IKEA device. I don't have personal experience with Ruuvi Air specifically, but have been using their cheaper Ruuvi Tags (that don't measure CO2) for temperature, humidity and air pressure measurement at home and office.
> I also don’t know how much electricity they pull.
It can't be much, since the Aranet 4 can run for years on 2 AA batteries.
I would hesitate to say the IKEA is worse. Inside the IKEA is a reputable Sensirion all in one sensor module. It's much cheaper and smaller because the CO2 sensor in it is using different (newer) technology that only released a few years ago from Sensirion.
(Upd: the IKEA does have lower accuracy, with ±100 ppm instead of ±30 ppm. From the SEN63C datasheet)