alt Hacker NewsOpenWrt One – Open Hardware Router
Comments
They are working on an OpenWRT Two at the moment which will be Wifi 7.
OpenWRT runs on a lot of hardware and its a great way to extend the life of a router past the manufacturers patches as well as gain a lot of capabilities. I wouldn't buy a commercial router that wasn't supported by OpenWRT now.
Off topic, but what amuses me about the "Wrt" name is that it was originally alternate firmware for the Linksys WRT54G router from 25 years ago. The name has stuck for whatever reason; I guess since only geeks use it and know what it is.
I use opnsense with an aliexpress n100 router. It works very well and I enjoy it. But upgrades scare the crap out of me. I've only had 1 upgrade where things went bad. I have zfs snapshots and everything, but just because its a headless unit, I get super anxiety upgrading the system waiting for the beeps for it to come back online.
How about OPNSense on open hardware of your choice, and passing messy wireless to separate AP?
OpenWRT is very good, but the installation and upgrades are not easy. There is a zoo of images for different hardware, installation options and tools. It has to run on small devices, so there are limitations. The documentation on Wiki is scattered and could be improved.
I had to search forums for weeks for a custom package installation for my router. Right now I have been trying to upgrade to the latest version via LUCI for a while, and it stucks. Probably have to wait for few weeks, go through CLI and maybe search forums again.
I just thought I am paying a hefty time price for a bit more expensive x86 mini pc and AP.
Since we're talking WiFi, I'll mention
The single best wifi reference I've found to date.
$106usd or $84usd without a case and antennas. That’s a solid price. Wish it had more than 1gb ram - goddamn datacenters.
I have and love my OpenWrt One for my main router. I have two, so that I have a backup one I can switch to if the first one ever dies. It is the best device to run OpenWrt on as it is fully supported hardware that has great images/packages for it. Routing speeds/buffer/latency are great, everything just works, price is very reasonable.
I don't use it for my APs, but that is mostly because I already had 3 TP-Link routers setup as dumb APs using OpenWrt that have been working great. If I did it again, I'd buy OpenWrt Ones though. Although Deco mesh kits I've used have worked exceptionally well, and have become my recommendation for friends/family that don't want to do things like run arbitrary packages on their router/APs.
I switched from a Google Wifi to this and found it to be just as stable, but with better range/signal strength, and easier to apply the parental controls I want.
Does it have hardware PPPoE offloading? Because it's a huge issue for those of us stuck with old-school telecoms for our fibre connections. Doing PPPoE at gigabit speeds needs something that can handle it.
Just two Ethernet ports (1+2.5GbE), and it’s dual-band (no 6GHz)… I’m not sure who’s the target audience or what’s the use case.
I started down my “custom” home network journey with OpenWrt and some aftermarket hardware routers. Enjoyed my time using / playing with it.
After some time though, I eventually moved over to using OpenBSD directly. My small brain has a much better understanding of all the moving parts compared to that of OpenWrt :P
This is the official shop page afaict: https://www.bpi-shop.com/products/banana-pi-openwrt-one-rout...
I have one of these and love it, especially after I once bricked it during a manual software update and got to use the dip switch reset to reflash it using the ROM.
I wish it had more ethernet ports but I've managed to live with that. I'd be up for buying an OpenWrt Two as a backup or to replace this if it has even one more LAN jack.
I became interested in OpenWrt when I noticed that the cloud portal for my ISP reported to me the names and types of devices that were associated to my home access point/router.
Suddenly I want to put every IPS device into dumb bridge mode, and run my own damn router.
As someone who knows very little about WiFi, I always thought it sucked that if you wanted to go from 802.11this to 802.11that, it always requires brand new hardware with a different WiFi chip that implemented the new standard. Is there a good reason that software-defined 802.11 doesn't exist and that every new standard requires a different radio+SoC?
I have one of these for a few months now. Works like a champ. Firmware updates are very easy now through the web interface.
Next step: open source hardware ASIC for the open router ?
Are these for sale in the US?
There is definitely beauty in having a separate router device that chugs on just fine regardless what happens to the rest of your network. But I got bored with the constantly-churning embedded culture, bespoke OS's (sorry, OpenWRT), and VPNs generally want more CPU than what purpose-built "routers" have. So I just went back to the old way of using a plain Linux machine as the gateway (now virtualized, with NixOS and nftables) and couldn't be happier. WiFi AP is done by that same physical machine (not virtualized) and by two other amd64 machines that double as Kodi boxes. When you learn netfilter/iproute2, that experience carries to anything else you might switch to.
Some previous discussion around the launch in 2024:
where to buy?
This thing has no practical purpose. The whole point of OpenWRT is to run it on cheap commodity hardware. This ticks none of those boxes.
It has two Ethernet ports, no switch. WHY?
Inexplicably can be powered via PoE, makes no sense if its purpose is to hang off your ISP's gateway (which almost certainly lacks PoE supply). PoE feature will never be used. You're not attaching this monstrosity to the ceiling.
It's utterly gigantic due to inefficient PCB layout.
Why is right to repair important for a throwaway router? Given what will usually fail are the hard to source ASICs.
By the time it breaks it will be obsolete anyway. As pointed out elsewhere in this thread they are already working on a successor.
There is so much better hardware out there manufactured in volume for cheaper.
It was likely a fun engineering project for someone but the business case isn't there.
Gigabit / 2.5 Gbit connectivity is already obsolete. Any modern product must have 10gbe WAN with the hardware to back up NAT at that throughput.
What a coincidence to see this on the front page!
I just received my OpenWrt One because I’m tired of dealing with the questionable quality of most routers.
And I don’t feel like resurrecting my old PC that I used as a router for a while. I stopped doing that because it’s loud. Pretty sure the power supply fan is about to fly off.
But Qualcomm WiFi pci card with giant antenna in a dirt cheap PC running ancient Ubuntu and a simple hostapd setup is so far the most reliable WiFi router I’ve ever had. I hope openwrt one is even better :-)