logoalt Hacker News

toast0 • today at 8:47 PM • 2 replies • view on HN

It's not really possible to measure the time it takes light to move from point A to B. You can really only measure the time it takes for light to move from point A to B and back.

But you can do measure the difference between light going from point A to point B and light going from point A to point C to point B (and adding point C in the reverse direction as well) and I think you can use that to get reasonable confidence that light has constant speed in a given medium in all directions.

But this is totally relevant for trying to figure out asymmetric delivery delays in packet switched networks... You can't measure the delay directly, and if you use the network to synchronize your clocks, you can't use the clocks to measure the delay either, because most synchronization assumes symmetric delay. You need an externally synchronized clock, like a GPS reference etc.


Replies

function_seven • today at 8:55 PM

Let's assume light goes faster in the "north" direction, and slower in the "south" direction.

Wouldn't the north- or south-component of the vectors to C cancel each other the same way they do when going from A–B vs. B–A? If the vector AB is on the north-south axis, and C is somewhere to the east, then the increase in speed from A–C–B would be offset by the decrease on the B–C–A return trip, giving you no information as to what direction is faster.

cyberax • today at 9:25 PM

> It's not really possible to measure the time it takes light to move from point A to B. You can really only measure the time it takes for light to move from point A to B and back.

You absolutely can. Get two synchronized clocks, and start pulsing light at each tick. Then slowly move one clock away and observe how long it takes for the light pulse to arrive.

You don't even need crazy precision for that. A regular atomic clock would do.

Edit: if you didn't get the hint, that's exactly how GPS works.

➕ show 1 reply