It’s super cool this person did this but even with AI, it’s a super power a normal user can’t pull off.
The notification marketing spam is really bad right now. I can literally turn off every marketing toggle in the Uber app (buried as it is), save it, then swipe out of those settings, then back in, and the notifications are all enabled again. Same goes for a lot of other apps, like the Dominos pizza app.
It’s gotten to the point where I just install the app, use it to order a pizza or a ride, the. uninstall the offending app (though sometimes I still get ghost notifications!)
But for apps like those for garage doors, that’s not a viable strategy.
I know why these notifications happen. The open rate ranges from 5-20% (though up to half of these can be accidental, but at least you got them back into the app, right).
But it really feels like an intrusion on the iOS and Android in ways that can compromise usage of the phone. It seems like at least Apple used to care about this and maintain UX standards but it seems like that has gone out the window.
For people who can’t jury rig a solution to their garage door opener, what can they do?
Philips (Signify) Hue is also horrible. You open the app, want to switch on a lamp, bam "Buy these new lamps for only 250 eur". Or "You need an account", which I don't need btw, everything I paid for works thank you. When I first started I just saw my rooms listed, now the top 2 tiles are "You need an account for "protection"" and then another one "Hue Secure: Help secure your house!". You can't remove these, you have to scroll down (more) to reach the intended goal for opening the app. w.t.f. Do you know how much I have paid them already?
I am of the persuasion that a smart home should never require whipping out your phone, but I have not been able to brush away all occurrences yet. But the Hue app always motivates me to either do things via Home Assistant (including just coupling the bulb directly using ZigBee) or get a switch ASAP.
Yes Signify (former Philips), you got an ad in my face, congrats, but you also got me super annoyed and I'll be on the lookout for alternatives.
Apps for devices that I purchased that show ads is probably one of my biggeset tech pet peeves.
I will sell/replace/throw every device if I see a ad in the ecosystem. Almost every IOT manufacturer does this crap so it gets more difficult. Moving the device to Home Assistant helps a little.
Ecobee you're next, and I hope you go down in flames having such crap software.
Chalk me up to another happy user of Ratgdo. I got one of the older ESP8266-based ones whose Homekit firmware has been in "maintenance mode" by the developer due to its board having limited RAM and processing power to do the things they're doing with the current boards. That was a bummer to find out since I'd had the thing for less than a year and I was using the "dry contact" system: manually wired magnetic switches on the door to tell the board whether the door is up, down, or in a state between (opening or closing). It's a very, very old garage door opener.
Since the code was put in a "best-effort basis" for future updates, it's gone from version 2.2 to 2.2.6 with numerous fixes. Most notable was software-configurable "debounce" functionality which finally solved my problem with the door tripping the magnetic reed switches several times quickly when the door comes to a stop and confusing the board about its current up/down status.
I bring it up because I have tremendous enthusiasm for people who take an idea, a cheap microcontroller, and put together a solution for people who prefer to stick with older, simple appliances but still want some sort of smart functionality. People who "make cool stuff and put it on the internet." That the creator disclosed that he's putting his focus on the newer boards and will maintain/fix issues with the older ones on a "best-effort" and then actually does it... it's fantastic. Because of this continued support and fixes, I can't recommend Ratgdo boards enough.
For those curious, the apparent character-spam "RATGDO" is actually an acronym for Rage Against The Garage Door Opener.
There's a term for this. It's called "enshittification," and it's a cancer on our technological society.
I've never understood how technologists, product managers, and marketing people can sit in the same conference room and collectively decide, "Hey, let's start sending unsolicited marketing push notifications to our users, and while we're at it, we can make another $1,000 a month by stuffing Google Ads into the app."
And then everyone around the table nods their heads and says, "Great idea, let's do it!"
If I were in that room, I'd be throwing chairs. I'd be so vehemently opposed to this kind of garbage that the meeting would come to a screeching halt.
I genuinely cannot comprehend the decision-making process that leads an entire room of supposedly intelligent people to agree that deliberately degrading the user experience for a few extra dollars is a good business decision. These are not freemium products - these customers paid for these products!!
I went through this exact pipeline last year.
Chamberlain used to have a HomeBridge, that connected to HomeKit, device that would sit in your garage and sit on your wifi network. It would pair with the opener similar to how a normal wall-mounted garage door panel would. Not only was this setup a little clunky, it was slow. The Siri -> Door open process would often take 5-10 seconds. This wasn't great, but it worked. Sort of.
Then, they did two things that made my blood boil: they discontinued support for it and prevented you from repairing the device with their myQ app, then started using notification for ads.
When I was about to sink an unhealthy amount of time into a garage door opener, ratgdo came in and rescued me. Not only was it simple to install but it was lightning fast. On the same network, it started opening and closing the door the second the Siri command went off. I can only assume that the previous system used to do roundtrips to Chamberlain and the connection wasn't the fastest in the garage.
Ratgdo man, if you read this you have my thanks (and my money, obviously.)
Home automation was better off with X10
Uses your existing wiring, etc.
Chamberlain made a new protocol that breaks the ability to do this with their new openers. They’ll get away with it too because there’s not many options for garage door openers and most people just buy whatever the contractor installs
We say this about many things in tech, but IoT really seems like an area that's long overdue for some kind of open protocol standardization. The device makers can build their services on top of it and run whatever business model they want, but they should at least be forced to give us an escape hatch.
It wouldn't bother me one bit if apple/google banned advertisements in notifications period.
I have the dreaded MyQ because my new Honda didn't come with Homelink buttons and they make you tie into MyQ to access the opener via CarPlay. If any of this has a CarPlay solution, I'm in.
Whenever I see something like this, it reminds me of how frustrated I am with the majority of people for not only accepting this, but falling for it.
The reason ads come at us from every fucking angle of life is because they work. That’s unacceptable, imo.
They don’t work on me, they don’t work on you, so who the fuck do they work on?
The answer: most people. And that’s why they keep showing them.
All of the anti-patterns we all hate only perpetuate because they work.
We really need to figure out a way to educate people better so that these practices stop working. And I’ve no clue how to do that (tried with my parents, failed miserably in a cloud of “this is too confusing I don’t care.”)
Pro Tip: you don’t need to buy one of the very expensive official ratgdo devices, if you are adventurous and can solder. The software is free and for a few bucks and a little time in KiCad you can build yourself a PCB, solder on the ESP32 and some electronics, and you’re off and running.
I unplugged my myQ garage door opener and just manually open it, the spam was so bad. Whatever, I will walk into the house, open the door, and pull in, and close it, to not deal with it. Also, I've become paranoid about hacks lately and once a hack can manually unlatch the lever and get inside, I'm cooked anyways.
I have LG washtower thinQ enabled, and the phone app was maybe worse than the garage door opener app. But, at least, the app can be deleted, and the data endpoints are still emitting sensor data enough for home assistant to pick it up. No spam because no app. I get an email when the washer/dryer finishes, I know to plop wet clothes into the dryer, and that works great. That's a good experience. Getting phone ads for soap at 2am is not a good experience.
Blink, the AMZN owned WiFi cameras (which, credit where credit is due, have been running flawlessly without a subscription for 5+ years for me), recently started sending me emails for "troubleshooting" a camera that's down. The "troubleshooting" is replacing the batteries. It comes with an ad to buy a specific brand of lithium batteries. On Amazon. They haven't had the audacity to send a push notification for this yet.
I have a zero tolerance policy for spam - notification permissions get taken away on the first offense, emails get marked as spam. I've had the ratgdo on eternal to-do list for a while, so this post speaks to me.
Ekyro smart garage door opener on Amazon. $30 and no subscription. 15 minutes to install.
I have had a MyQ-enabled garage door opener for about a month now. I wanted a dumb one, but the installer company who replaced the garage door didn't offer one. Instead, it's just sitting there, denied Bluetooth and WiFi access until I get around to hooking up the z-wave dry contact relay controller (or perhaps ratgo, but I already have a spare relay sitting around).
A few weeks ago, I noticed my Apollo-1 Air quality sensor was seeing some strange behavior in the basement. Home Assistant showed an unexplained temperature spike and humidity drop a little before 1am.
I managed to figure out from other sensors that nothing was actually awry (no spikes in draw of nearby devices, no telltale gas signatures of the water heater kicking on, no motion or CO2 indicating human or other large animal presence). Was the board malfunctioning? Fortunately the device has an internal temperature sensor and an ambient sensor which are separate. Logging confirms the temperature spike originated on the board, probably from the WiFi chip.
But, why?
It turns out, after inspecting the signal a bit more, than the MyQ was broadcasting so loudly between the WiFi and BLE, screaming for someone to talk to it, that my air sensor was having to increase its power to still be able to communicate over all the noise. Switching to a different channel for the crappy old downstairs AP fixed it, but still, c'mon!
I'm a little wary of connecting any sort of ingress/egress to my home to the network at all, even locally, but an honest appraisal of the basement is that smashing a window is probably a much bigger threat model than hacking the door opener. Or in other words, https://xkcd.com/538/
this echoes my own frustrations with the user hostility of chamberlain/myq. an added bonus is that in the app they force you to use to control the door instead of integrating with home automation standards, the video banner ads will force whatever audio you might have playing on your device to pause. they're testing the limits of hanlon's razor over there.
i've been meaning set up a dedicated domain/website just to collect complaints about this company's behavior, alternatives, workarounds for their failures like the one posted here recently [1], and importantly, laws. we need laws.
mentioned already in these comments: granular control over notifications between marketing & functional, and no circumvention by intermingling the two. home automation devices may be allowed to traverse wans to offer remote control for non-vpn/sd-wan users, but should not have their core functionality _or_ initial setup depend on an internet connection.
finally, locked devices produced by companies over a some market cap or another and their subsidiaries should be required to offer a bootloader for user/open firmware after some reasonable period of time to mitigate some of the mountains of ewaste we are producing with this stuff.
I love that ratgdo stands for "rage against the garage door opener". I bought a pair for my own garage because I wanted home assistant integration and the native garage door app disallowed that. I feel like an element of spite is in there as well. I've already paid for the machine, if you hamstring my use of it I will do what I can to cut you out of my life.
I have myQ also, but solved this problem in a different way.
I use NextDNS, which allows me to block ads (including a lot of mobile ads) at the DNS level.
I disabled all notifications for myQ.
And I configured the garage door to auto-close at 9pm.
Had a similar experience with a niche phone made in the UK from Wileyfox. After they entered administration all the app updates contained some funky 'add ons'
I'm really, incredibly disappointed that Apple (or Google for that matter) doesn't enforce some sort of CANSPAM on notifications.
I need your business notifications, I do not need or approve of your advertising/product updates.
For my mobile OS, all notifications look the same. "AI priority" is the only attempt at this but I don't need AI priority if I have a very tight-knit circle of apps that can send notifications.
Then one important app sends me spam and I turn it off immediately.
I went with a Meross MSG100hk garage door interface. It works with HomeKit and I added a HomeKit automation to turn a light on/off based on door open status.
In which I bypass myQ for an open source solution
That’s cool and i loathe the myQ ads too. No idea what idiotic marketing decision drove them, as i eagerly search regularly for alternative lifters. Like is Chamberlain the only game in Oz and Europe like in the US?
I have a Chamberlain/myQ garage door opener, but I do not own the house (it's a townhouse I am renting). This probably limits my ability to install/use Ratgdo.
I also hate the amount of ads the myQ app has, like it's pretty much nothing but ads (and reporting this to the Play Store does nothing).
Currently, my garage door opener is connected to my WiFi (on its own "IoT VLAN") because I once had to use myQ to open my garage whilst away to let my friend into the house.
Normally, I just use a "normal" garage door opener remote (and my car's built-in HomeLink buttons).
Ah, this is so cool.
When I eventually buy a house with my own garage, I'm totally adding the garage door to Apple Home so that I can operate it with my voice while inside my helmet on my motorcycle, and not have to take my gloves off and get the remote control out. I hadn't thought of that possibility.
Out of curiosity, how's the device doing on FCC certification?
Using a pre-certified module doesn't let you bypass certification.
The Chaimberlain / MyQ situation is terrible. I strongly recommend avoiding them all together.
I recently installed a Chaimberlain garage door opener in a location that required three buttons inside the garage. They limit the buttons in software, so that each garage door opener can have only two at any given time!
After some tinkering, I discovered that the Chaimberlain buttons transmit their signal wirelessly these days, even when "wired" to the garage door opener... the wires only provide power. So...
I worked around the problem by placing a dab of solder on one of their security+ 3.0 buttons so that it is always "pressed." Then I wired up the three old school garage door momentary switches to send power to it. When pressed, they power up the Chaimberlain button, which then sends a wireless signal to open the door.